SECTION 3
OPERATION
TABLE 3-1. OPERATING CONTROLS AND INDICATORS (CONT.).
INDEX NO
FUNCTION
NOMENCLATURE
TYPE
8
Your-position, key-
No. 1 Position: Accessory position.
operated interlock
Applies power to
switch
lights and spray
switches (if so
equipped).
No. 2 Position: Off position. Removes
all power to the elec-
trical circuits.
No. 3 Position: On position. Applies
power to all electri-
cal circuits with
engine running. This
position is also a
lockout position. It
prevents accidental
engagement of the
starter motor when
engine is running.
Ignition Key must be
rotated back past this
position to the No. 2
(OFF) position before
starter motor can be
energized again.
NOTE: Later pro-
duction units are no!
equipped with this
feature.
No. 4 Position: Start position. Applies
power to starter motor
to crank engine.
Switch spring returns
to No. 3 position when
key is released.
Indicates total hours of engine
Meter
9
HOURMETER
operation.
Controls transmission speed range.
10
TRANSMISSION
Lever (with me
Moving lever from the front of the unit
RANGELEVER
linkage)
in a straight line towards rear of unit
will shift transmission from first,
neutral, second, neutral then third.
3-2.