TM 5-3895-346-14
AXLE
DISASSEMBLY
DISASSEMBLE THE PLANETARY ASSEMBLY
1.
Remove the planetary wheel cover capscrews (refer to Fig. 3).
2.
Remove the planetary wheel cover.
3.
Remove the cover to planetary spider gasket (refer to Fig. 4).
4.
Remove the planetary spider stud nuts and lockwashers.
5.
Separate and remove planetary spider assembly from wheel hub assembly by use of puller screws
in threaded holes provided in the spider flange (refer to Fig. 5).
6.
Remove planetary spider to hub gasket.
DISASSEMBLE PLANETARY SPIDER ASSEMBLY
Planetary spur gears rotate on planet pins. Each gear rotates between hardened thrust washers.
1.
Press out the planet gear pins as shown (refer to Fig. 6).
Figure 3.
Figure 5.
Figure 4.
Figure 6.
605
