(16) Install the cover band (22).
(17) Install and tighten the cover band screw (23) and nut (24).
e. Installation. Refer to paragraph 114c.
194. Magnetic Switch
a. Removal. Refer to paragraph 115b.
b. Disassembly.
(1) Remove the terminal studs (12), lockwashers (16), and plain washers (17). Disconnect the capacitor lead
(11) from the magnetic switch case (18).
1
Cover screws (3 req'd)
11
Capacitor lead
2
Washers (3 req'd)
12
Terminal studs (2 req'd)
3
Cover
13
Screw, machine, rd hd, No. 6
4
Gasket
14
Washer, lock, std, No. 6
5
Cupped washers (2 req'd)
15
Capacitor
6
Contact spring
16
Lockwashers (2 req'd)
7
Contact disk
17
Flat washers (2 req'd)
8
Plunger
18
Case and coil
9
Nuts, hex, No. 10 (2 req'd)
19
Plunger return spring
10
Washers, lock, std, No. 10 (2 req'd)
Figure 115. Magnetic switch disassembled.
(2) Remove the nuts (9) and lockwashers (10) from the magnetic switch case (18).
(3) Remove the three cover screws (1) and washers (2) attaching the cover (3) to the case (18).
(4) Lift up and remove the cover (3) and gasket (4).
276