1
Flywheel housing
8
Magneto
2
Cylinder head
9
Carburetor
3
Lifting ropes
10
Oil pan
4
Lifting hook
11
Engine block
5
Fan
12
Clutch
6
13
Transmission
7
Governor housing
Figure 81. Engine removal.
(9) Disconnect the fuel line from the carburetor (par. 106).
(11) Check to see that all leads and linkages are disconnected.
(12) It is recommended to remove the engine with the clutch (12) attached to the engine. Be sure to engage the
clutch before the removal of the engine. This will prevent the clutch hub and back plate assembly from
slipping out of alinement, thus facilitating the installation of the engine and clutch assembly on the
transmission when installing the engine.
202