If necessary, use a press to remove the spherical
bearing from plate (7).
When installing the spherical bearing in plate (7)
the grease holes must be positioned vertically.
If necessary, remove spherical bearings (8) from yoke
Remove steer lock pin (10) from steer pivot (9).
Remove nuts and bolts (11) and the spacers that fasten
the steering cylinders to steer pivot (9).
Position a suitable floor jack under steer pivot (9) as
Remove nuts and bolts (12) that hold the pins in place.
Remove pins (13) and the shims, and remove steer
pivot (9) from the machine frame. For assembly
purposes, note the quantity and location of the shims.
The weight of the steer pivot is 160 kg (352 lb).
If necessary, remove the four spring bushings from the