TM 5-3895-383-24
ROPS
Remove & Install ROPS 7323-010
Tools Needed
A
138-7575
Link Bracket
1
1.
Disconnect electrical connector (1).
2.
Attach a hoist and Tooling (A) to ROPS (2) as shown.
3.
Remove 12 bolts (3) (six from each side), and remove
ROPS (2) from the machine. The weight of the ROPS is
180 kg (396 lb).
NOTE:
For installation of the ROPS, reverse the removal
steps.
Cab
Remove & Install Cab 7325-010
Tools Needed
A
138-7575
Link Bracket
1
1.
Tilt the cab. Refer to the topic "Tilt & Lower Cab" in this
manual.
Personal injury can result from contact with refrigerant.
Contact with refrigerant can cause frost bite. Keep face
and hands away to help prevent injury.
Protective goggles must always be worn when refrigerant
lines are opened, even if the gauges indicate the system is
empty of refrigerant.
Always use precaution when a fitting is removed. Slowly
loosen the fitting. If the system is still under pressure,
release it slowly in a well-ventilated area.
Personal injury or death can result from inhaling
refrigerant through a lit cigarette.
Inhaling air conditioner refrigerant gas through a lit
cigarette or other smoking method or inhaling fumes
released from a flame contracting air conditioner
refrigerant gas, can cause bodily harm or death.
Do not smoke when servicing air conditioners or wherever
refrigerant gas may be present.
Use a certified recovery and recycling cart to properly
remove the refrigerant from the air conditioning system.
2.
Recover the air conditioner refrigerant from the air
conditioner
system.
Refer
to
Service
Manual,
SENR 4554, "Air Conditioning and Heating Systems
with R-134a Refrigerant" for the correct procedure.
Refer to the Special Publication, NEDG5065, "Air
Conditioning Tools" for the correct tools.
14-140
