TM 5-3895-383-24
18.
Use Tool (D) to install seal (7) and seal (8) back-to-back
in cover (2).
19.
Install two drain plugs (1) in cover (2).
20.
Flip the eccentric weight housing over and use Tooling
(C) and (D) to install seal (19) and seal (20) back-to-
back in the housing (3).
21.
Use Tool (E) to check end play. Total end play should
not exceed 0.50 - 1.35 mm (0.020 - 0.050 in). If not
within tolerance, check all assembly procedures again.
End By:
a.
install eccentric weight housing
14-111
