TM 5-3895-383-24
Eccentric Weight Housing
Remove & Install Eccentric Weight
Housing 6606-010
Tools Needed
A
B
154-6183
Forcing Screws
2
150-3978
Handling Bracket Assembly
1
151-7537
Adapter Bracket Assembly
1
Start By:
a.
remove drum support housing
b.
remove drum gear reducer
1.
Drain the oil from the eccentric weight housing into a
suitable container. The capacity of the eccentric weight
housing is 11.83 liters (3.12 U.S. gal).
NOTE: Locating mark is welded to inner diameter of
drum near outside edge.
2.
Position the drum with the locating mark on the drum
down and the notch (X) on eccentric weight housing (1)
is at the top.
3.
Remove two 8T-4187 bolts (2) 180 from each other and
install guide bolts in each side.
4.
Remove 16 remaining 8T-4187 bolts (2).
5.
Remove two 8T-4779 bolts (3) and use Tooling (A) to
separate the eccentric weight housing from the drum.
6.
Attach Tool (B) to the eccentric weight housing as
shown, locking Tool (B) to the eccentric weight housing
using handles on each side of Tool (B).
7.
Remove the eccentric weight housing from the drum
assembly. The weight of the eccentric weight housing is
330 kg (726 lb).
8.
Remove shaft (4) from drum.
14-104
