TM 5-3895-383-24
25.
Remove the remaining two bolts that fasten air cleaner
bracket (28) to the hydraulic oil tank.
26.
Attach Tooling (A) to the hydraulic oil tank frame.
Attach a suitable hoist and lifting chain to Tooling (A).
27.
Remove four bolts (30), and remove hydraulic oil tank
(29), radiator and hydraulic oil cooler as a unit from the
machine. The weight of the hydraulic oil tank, radiator
and hydraulic oil cooler as a unit is approximately 227
kg (500 lb).
NOTE: For the installation of the radiator, hydraulic oil
cooler and hydraulic oil tank, reverse the removal
steps.
NOTE: After the radiator, hydraulic oil cooler and
hydraulic oil tank have been installed, fill the
cooling system with coolant to the correct level.
Fill the hydraulic oil system with hydraulic oil to
the correct level. See the Operation &
Maintenance Manual, Form No. KEBU7503, for the
correct procedures.
Disassemble & Assemble Radiator,
Hydraulic Oil Cooler & Hydraulic Oil Tank
1353,1374 & 5056-010
Tools Needed
A
138-7573
Link Bracket
2
Start By:
a.
remove radiator, hydraulic oil cooler & hydraulic oil
tank
1.
Remove four bolts (1) from support brace (2) and
remove the support brace.
2.
Loosen the two clamps and remove coolant hose (3)
from hydraulic oil tank (4) and radiator (5).
9-9
