TM 5-3895-382-24
Axle Gear Reducer
Change Gear Lubricant
Located under the rear of the machine in front of the
differential.
1.
Remove drain plug (1) and allow gear lubricant to
drain.
2.
Clean and install the drain plug.
3.
Remove fill/check plug (2) located on front side of
the gear reducer case.
4.
Add gear lubricant See the "Lubricant Viscosities
and Refill Capacities" chart.
5.
Maintain gear lubricant to the bottom of plug (2).
Axle Planetary
Change Gear Lubricant
1.
Move the machine until the plug is in the six
o'clock position. Remove the plug and allow the
gear lubricant to drain.
2.
Move the machine until the plug is in either the
three o'clock or the nine o'clock position. Add
gear lubricant. See the "Lubricant Viscosities and
Refill Capacities" chart.
3.
Maintain gear lubricant to the bottom of the plug.
Clean and install the plug.
4.
Repeat procedure on other planetary.
Maintenance Section
1-85
Every 1000 Service Hours or 1 Year
