TM 5-3895-382-24
Maintenance Intervals (Commercial Practice)
Use service hours or calendar interval, whichever occurs
first.
NOTE: Performance
of
all
lubrication
and
maintenance items in the Maintenance
Management
Schedule
is
the
owner's
responsibility.
When Required
Radiator Core - Clean .......................................... 1-45
Circuit Breaker/Fuses - Check/replace ................. 1-45
Tires - Check pressure........................................... 1-46
Wheel Nuts - Tighten ............................................ 1-46
Drum Scrapers - Adjust ........................................ 1-47
Drum Scrapers - Replace if damaged ................... 1-48
Platform Tilting - Adjust ....................................... 1-48
Cutting Edges - Check For Wear .......................... 1-49
Every 10 Service Hours or Daily*
Walk-Around Inspection - Inspect machine .......... 1-50
Seat Belt - Inspect ................................................ 1-51
Engine Air Intake System - Check service
indicator/check/clean elements ........................... 1-51
Engine Crankcase - Check oil level ...................... 1-53
Hydraulic Oil System - Check filter
indicator/oil level ................................................ 1-54
Cooling System - Check coolant level ................... 1-55
Fuel Tank - Check level ........................................ 1-56
Water Separator - Drain water and sediment ......... 1-57
Indicators and Gauges - Test for proper
function ............................................................. 1-57
Back-Up Alarm - Check operation ......................... 1-58
Horn - Check operation ......................................... 1-58
Light Switch - Check operation ............................. 1-59
Neutral Start Switch - Check operation ................. 1-59
Hydraulic Hoses - Check condition ....................... 1-60
Every 50 Service Hours or Weekly*
Oscillating Pins - Lubricate fittings......................... 1-61
Steering Pins - Lubricate fittings ........................... 1-61
Blade Cylinder Pivot Points -
Lubricate fittings.................................................. 1-62
Blade Pivot Pins - Lubricate fittings ...................... 1-62
Steering Cylinder Ends - Lubricate fittings ............ 1-63
Every 100 Service hours or Monthly *
Drum Gear Reducer - Check level ........................ 1-64
Axle Gear Reducer - Check level .......................... 1-64
Axle Planetaries - Check level .............................. 1-65
Axle Differential - Check level .............................. 1-65
Drum Support Housing - Check level ................... 1-66
Vibratory Bearing Reservoir - Check level ........... 1-66
Initial 250 Service Hours or First 3 Months
Operation
Hydraulic System - Change Filter ......................... 1-68
Drum Gear Reducer - Change gear lubricant ......... 1-68
Axle Gear Reducer - Change gear lubricant .......... 1-68
Axle Wheel Planetaries - Change gear
lubricant ............................................................ 1-69
Axle Differential - Change gear lubricant ............... 1-69
Engine Valve Lash - Check/adjust on new or
reconditioned engines at first oil change only ....... 1-70
Every 250 Service Hours or 3 Months*
Scheduled Oil Sampling (S· O·S) - Obtain sample
for analysis ........................................................ 1-71
Engine Oil and Filter(s) - Change ......................... 1-72
Belts - Inspect/adjust ............................................ 1-75
Batteries - Clean/Check electrolyte level ................ 1-76
Fuel System - Clean strainer and sediment
chamber, change filter and water separator
element .............................................................. 1-77
Fuel Tank Cap and Fill Screen - Clean ................. 1-80
Hydraulic Tank Breather - Wash breather ............. 1-81
Every 500 Service Hours or 6 Months*
Blade Cutting Edges - Inspect ............................. 1-82
Cooling System - Add/Check coolant additive ....... 1-82
Maintenance Section
Maintenance Intervals
1-43
