TM 5-3895-382-24
Table 1-1. Unit Preventive Maintenance Checks and Services - CONT
Location
Item
Interval
Man-
Item to be
Procedure
Not Fully Mission
No.
hour
Checked or
Capable If:
Serviced
21
1,000 H
0.1
Engine Air
Replace air cleaner primary and secondary
Intake System
elements (page 1-52).
WARNING
Do not drain hydraulic oil while oil is
hot. Severe injury to personnel may
result.
Prolonged contact with lubricating oil,
MIL-PRF-2104 may cause a skin rash.
Skin and clothing that come in contact
with lubricating oil should be
thoroughly washed immediately.
Saturated clothing should be removed
immediately. Areas in which
lubricating oil is used should be well-
ventilated to keep fumes to a minimum.
Oil is slippery and can cause falls. To
avoid injury, wipe up all spilled oil with
rags.
NOTE
Refer to DA Pam 738-750 for
sampling requirements.
After expiration of warranty, active
and reserve Army Units and National
Guard activities will send a hydraulic
oil sample to an AOAP laboratory for
analysis once a year.
Intervals for sampling as well as
draining and refilling lubricants may
be changed by an AOAP laboratory.
If AOAP laboratory support is not
available, change hydraulic oil and
filter (page 1-83) after 1,000 hours of
operation.
22
1,000 H
0.3
Hydraulic Oil
Change hydraulic oil and filter (page 1-83).
or A
23
1000 H
0.3
Drum Gear
Change gear oil (page 1-84).
or A
Reducer
24
1000 H
0.3
Axle
Change gear oil (page 1-85).
or A
Planetary
1-17
