TM 5-3895-382-24
NOTE
Tag and mark all wires prior to
removal.
(6)
Slide cable cover (13) back and away from
positive (+) terminal (14).
(7)
Remove two screws (15), lock washers (16),
and two cables (17) and (18) from NATO
receptacle (19). Discard lock washers.
(8)
Remove screw (20), plate (21), two clamp
halves (22), and plate (23) from two cables (17)
and (18) and clip (24).
(9)
If damaged, remove clip (24) from hose (25).
(10)
Open left side door assembly.
(11)
Slide cable cover (26) back and away from
positive (+) terminal (27).
NOTE
Depending upon installation, other
cables may need to be removed from
starter.
(12)
Remove nut (28) and positive cable (17) from
starter assembly (29).
(13)
From under roller, remove nut (30), lock washer
(31) and negative cable (18) from battery
disconnect switch (1).
(14)
Remove screw (32), plate (33), two clamp
halves (34), and two cables (17) and (18) from
plate (35).
(15)
Remove cables (17) and (18) from roller.
2-41
