TM 5-3895-379-23
PREPARATION FOR STORAGE AND SHIPMENT - CONTINUED
0214 00
STORAGE INSTRUCTIONS - CONTINUED
(21)
Fill crankcase with preservative oil (Item 28, WP 0219 00).
(22)
Attach tag to engine oil fill tube stating "THIS CRANKCASE IS FILLED TO CAPACITY WITH PRE-
SERVATIVE OIL. DRAIN AND REFILL CRANKCASE WITH ENGINE OIL BEFORE OPERATION
OF ENGINE."
g.
Apply protective sealant (Item 32, WP 0219 00) or equivalent to all exposed electrical wires, cables, and connec-
tors.
h.
Coat steering cylinder chrome rod with preservative oil (Item 28, WP 0219 00) and then cover with barrier mate-
rial (Item 5, WP 0219 00).
i.
Prepare air intake assembly:
(1)
Disassemble air cleaner assembly (WP 0032 00).
(2)
Fog inside of air cleaner canister with preservative oil (Item 28, WP 0219 00).
CAUTION
Preservation oil will damage non-metallic air filter parts. Care should be used when applying preservative
oil to air filter non-metallic parts.
(3)
Dip removed air cleaner components in preservative oil (Item 28, WP 0219 00).
(4)
Install air cleaner elements and components (WP 0032 00).
(5)
Wrap air intake restriction indicator in barrier material (Item 5, WP 0219 00).
(6)
Loosen hose clamp at turbo air inlet and pull off air inlet hose (WP 0035 00).
(7)
Spray inside of air inlet hose and turbocharger inlet impeller with preservative oil (Item 28, WP 0219 00).
(8)
Attach air inlet hose and tighten clamp (WP 0035 00).
j.
Prepare exhaust system:
(1)
Remove muffler (WP 0048 00).
(2)
(3)
Spray inside of exhaust pipe leading from engine with preservative oil (Item 28, WP 0219 00).
(4)
Install muffler (WP 0048 00).
(5)
Place barrier material (Item 5, WP 0219 00) over exhaust exit. Secure with tape (Item 38, WP 0219 00).
k.
Prepare water spray system:
(1)
Remove water line at bottom of tanks and drain all water (TM 5-3895-379-10).
0214 00-3
