TM 5-3895-379-23
HYDRAULIC OIL COOLER AND FAN SHROUD REPLACEMENT - CONTINUED
0145 00
REMOVAL - CONTINUED
15.
Remove eight screws (33), washers (34) and fan
shroud (35) from hydraulic oil cooler (6).
6
INSTALLATION
35
1.
Install fan shroud (35) on hydraulic oil cooler (6) with
eight washers (34) and screws (33).
34
33
401-752
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure. Fail-
ure to follow this warning may cause injury or death.
NOTE
Hydraulic oil cooler weighs 90 lb (41 kg).
2.
With assistance, install hydraulic oil cooler (6) on frame assembly (32) with two screws (31), washers (27), rubber
mountings (30), rubber mountings (29), washers (28), washers (27) and new locknuts (26).
0145 00-5
