TM 5-3895-379-23
SEAT SUSPENSION REPAIR - CONTINUED
0135 00
ASSEMBLY - CONTINUED
18.
Install upper housing assembly (21) on arm (35) by sliding arm and roller guides (43) in channel of upper housing
assembly.
21
35
401-707
NOTE
Ensure that arm is under shaft of bevel gear when bevel gear is installed.
19.
Install angle bracket (32) on upper housing assembly
31
34
(21) with two square neck bolts (34) and new locknuts
21
(33). Do not tighten locknuts.
20.
Install bevel gear (31) in angle bracket (32) and upper
housing assembly (21).
21.
Apply grease to teeth of bevel gear (31).
32
33
401-706
0135 00-10
