TM 5-3895-379-23
0089 00
REMOVAL - CONTINUED
2
8.
Remove nut (14) and lockwasher (15) from lamp
assembly (2). Discard lockwasher.
9.
Remove lamp assembly (2) from instrument box
assembly (8).
16
10.
Remove seal (16) from lamp assembly (2).
15
14
8
401-487
INSTALLATION
1.
Install seal (16) on lamp assembly (2).
2.
Install lamp assembly (2) in instrument box assembly (8).
3.
Install new lockwasher (15) and nut (14) on lamp assembly (2).
4.
Install two wires (13) on lamp assembly (2) with screws (12).
5.
Install instrument box assembly (8) on operator station (11) with three washers (10) and screws (9).
6.
Install vandal guard (7) on instrument box assembly (8) with two washers (6) and shoulder screws (5).
7.
Push lamp (4) and turn clockwise and install lamp in lamp assembly (2).
8.
Install seal (3) on lens (1).
9.
Turn lens (1) clockwise and install lens on lamp assembly (2).
1
3
4
2
401-488
10.
Close right-side door assembly (TM 5-3895-379-10).
11.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0089 00-3/(0089 00-4 Blank)