TM 5-3895-379-23
PARKING BRAKE SWITCH REPLACEMENT - CONTINUED
0069 00
INSTALLATION
1.
Install four wires (14), (15), (16) and (17) in parking brake switch (8) and tighten four screw assemblies (11).
2.
Install two wires (12) and (13) in parking brake switch (8) and tighten two screw assemblies (11).
NOTE
Tab of switch must fit in notch in panel assembly to properly align switch.
3.
Install parking brake switch (8) and seal (9) in panel assembly (5) with nut (7). Tighten nut.
4.
Push lamp (10) down, turn clockwise and install lamp in parking brake switch (8).
5.
Install cap (6) on parking brake switch (8) by turning clockwise.
6.
Install panel assembly (5) on operator station (3) with two washers (2), seven washers (4) and nine screws (1).
1
4
3
1
4
5
2
1
401-446
7.
Close right-side door assembly (TM 5-3895-379-10).
8.
Remove chocks (TM 5-3895-379-10).
END OF WORK PACKAGE
0069 00-3/(0069 00-4 Blank)
