TM 5-3895-379-23
ALTERNATOR REPLACEMENT - CONTINUED
0061 00
INSTALLATION
NOTE
Ensure alternator pulley is aligned with crankshaft pulley to within 3/32 in. (2.4 mm).
If alternator pulley is removed, install alternator pulley on alternator and tighten alternator nut to 48-55
lb-ft (65-75 Nm).
1.
With assistance, install alternator (5) on alternator
22
21
bracket (23) with screw (22), washer (20), spacer (21),
20
washer (20) and nut (19). Do not tighten nut.
2.
Install alternator (5) on alternator strap (18) and
20
welded nut (17) with spacer (16), washer (15) and
20
19
screw (14). Do not tighten screw.
23
5
17
16
18
15
14
401-425
3.
Install two wires (12), new lockwasher (11) and nut
(10) on terminal B+ (13) of alternator (5).
13
12
11
10
5
401-424
0061 00-3