TM 5-3895-379-23
FAN ASSEMBLY AND GUARD REPLACEMENT - CONTINUED
0059 00
INSTALLATION
1.
Position fan pulley (14) on fan drive housing assembly (22).
2.
Install spacer (13) and fan (12) to fan pulley (14) with four washers (11) and nuts (10). Tighten nuts to 15-25 lb-ft (20-34
Nm).
3.
4.
Install rear fan guard assembly (9) on fan shroud (6)
9
with two washers (8) and bolts (7). Tighten bolts to
7
4
5
33-47 lb-ft (45-64 Nm).
5.
Install front fan guard assembly (3) on fan shroud (6)
with two washers (5) and bolts (4). Tighten bolts to
33-47 lb-ft (45-64 Nm).
6.
Install two washers (2) and bolts (1) in front fan guard
assembly (3). Tighten bolts to 15-25 lb-ft (20-34 Nm).
8
3
2
1
6
401-427
7.
END OF WORK PACKAGE
0059 00-3/(0059 00-4 Blank)