TM 5-3895-379-23
TURBOCHARGER OIL LINES, HOSES AND FITTINGS REPLACEMENT - CONTINUED
0036 00
INSTALLATION
1.
Install new gasket (18) and elbow (15) on engine block (8) with two screws (16). Tighten screws to 15-25 lb-ft (20-
34 Nm).
2.
Install new gasket (18) and tube (17) on turbocharger (4) with two screws (16). Tighten screws to 15-25 lb-ft (20-34
Nm).
3.
Install hose (14) on tube (17) and elbow (15) and tighten two hose clamps (13).
4.
Install adapter (10) on manifold (12). Tighten adapter to 22-28 lb-ft (30-38 Nm).
5.
If removed, install compression sleeve (11) and nut (9) on tube assembly (2). Do not tighten nut.
6.
Install tube assembly (2) on adapter (10).
7.
Install clamp (7) on tube assembly (2).
8.
Install spacer (6), clamp (7) and tube assembly (2) on engine block (8) with screw (5). Tighten screw to 25 lb-ft (34
Nm).
9.
Tighten nut (9) to 10-12 lb-ft (14-16 Nm).
10.
Install new gasket (3) and tube assembly (2) on turbo-
1
charger (4) with two screws (1). Tighten two screws
(1) to 25 lb-ft (34 Nm).
2
3
4
401-334
11.
Lower operator platform assembly (WP 0128 00).
12.
Install muffler and exhaust pipes (WP 0048 00).
13.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0036 00-3/(0036 00-4 Blank)
