TM 5-3895-379-23
OIL STRAINER AND SUCTION TUBE REPLACEMENT - CONTINUED
0021 00
INSTALLATION
1.
Install retaining clip (11) and mounting plate (12) on strainer and suction tube assembly (2) with screw (13) and nut (9).
Do not tighten nut.
2.
Install bracket (7) on retaining clip (11) and mounting plate (12) with screw (10), and nut (9). Do not tighten nut.
3.
Install new gasket (6) and strainer and suction tube assembly (2) on oil pump (3) with two screws (1). Tighten screws to
16 lb-ft (22 Nm).
4.
Install bracket (7) and strainer and suction tube assembly (2) on bridge (8) with washer (5) and screw (4). Tighten screw
to 16 lb-ft (22 Nm).
5.
Tighten two nuts (9).
7
3
4
1
2
6
5
8
401-264
6.
Install oil pan (WP 0020 00).
7.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0021 00-3/(0021 00-4 Blank)
