TM 5-3895-379-23-2
0227
REMOVAL - Continued
4.
Remove grease fittings (Figure 4, Item 4) from pivot pins (Figure 4, Item 3).
5.
Remove pivot pins (Figure 4, Item 3) from bores in rear frame (Figure 4, Item 1) and steering pivot assembly
(Figure 4, Item 2).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
NOTE
Note the quantity and location of shims used for upper and lower pivot pins.
Weight of steering pivot assembly is 295 lb (134 kg).
Inspect shims for damage and wear and replace as necessary.
6.
Use lifting device and remove steering pivot assembly (Figure 4, Item 2) and shims from rear frame
(Figure 4, Item 1).
1
2
3, 4
2
M0703SWR
Figure 4.
Steering Pivot Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00165)
