TM 5-3895-379-23-1
0127
1.
For CB534B Roller, close fuel supply valves (Figure 4, Item 1).
2.
For CB534C Roller, close fuel supply valves (Figure 4, Item 2).
3.
Place drain pan under drain valve (Figure 4, Item 4).
4.
Open drain valve (Figure 4, Item 4) on bottom of filter element (Figure 4, Item 3) and drain fuel into drain pan.
5.
Loosen nut (Figure 4, Item 11) and slide clamp (Figure 4, Item 10) up to provide clearance for fuel line removal.
NOTE
Tag and mark all hoses prior to removal.
Inspect all hoses, lines, and fittings for cracks, bends, nicks, dents, stripped threads, and
cuts. Replace all damaged parts.
6.
Loosen two nuts (Figure 4, Items 9 and 14) and remove two tubes (Figure 4, Items 12 and 13), two bushings
(Figure 4, Items 15 and 16), and two bushings (Figure 4, Item 6) from fuel filter assembly (Figure 4, Item 17)
and two adapters (Figure 4, Item 7). Discard bushings.
7.
If damaged, remove two adapters (Figure 4, Item 7) and washers (Figure 4, Item 8) from fuel injection pump
(Figure 4, Item 5). Discard washers.
0127-6
03/15/2011Rel(1.8)root(maintwp)wpno(M00065)