TM 5-3895-379-23-1
0002
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - Continued
Table 1.
Location and Description of Major Components - Continued.
KEY
COMPONENT
DESCRIPTION
5
Vibratory Motors
The vibratory motors turn eccentric
weights inside drums which create
vibrating force that aids in surface
material compaction. They are
located on left-side of the rear drum
and right-side of the front drum.
6
Scrapers
The scrapers keep drums clean to
provide a smooth compacted
surface.
7
Engine Compartment
The engine and hydraulic pumps are
located in this compartment. The
engine and pumps power the
steering, propulsion, and vibratory
systems.
8
Drums
The drums provide a smooth surface
for surface material compaction.
9
Propel Motors
The propel motors provide power to
drums to move roller. They are
located on right-side of rear drum
and left-side of front drum.
10
Yoke Assembly
The yoke assembly provides support
for front drum and pivots on frame
assembly for steering.
11
Work Lights
The work lights provide light for use
in poor visibility situations. They are
located at front and rear of roller.
12
Water Spray Tanks
The water spray tanks hold water for
delivery to drums via water spray
nozzles on spray bars. A water spray
tank is mounted above each drum.
13
Toolbox
The toolbox holds tools the operator
needs to do all authorized
maintenance.
14
Operator Station
The pivoting console may be moved
90 degrees left or right to increase
visibility. The gauges and controls
move with console for easy
operation.
0002-3
03/15/2011Rel(1.8)root(descwp)wpno(G00005)
