TM 5-3895-379-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
a. If ambient temperature is
10. Engine Operating Temperature Is Too High
1. Check operating conditions
above 120F (50C), allow
(Warning Light and Warning Horn On).
and ambient temperature.
roller to cool. Operate roller in
When roller is operated
low amplitude (WP 0005 00)
continuously in ambient
and reduce travel speed.
temperatures above 120F
(50C) at high amplitude and
at high propel speed, engine
can easily overheat.
b. If operating conditions and
ambient temperature are
normal, go to Step 2.
a. If alternator V-belt is broken,
2. Open right-side door assembly
component is faulty. Close
right-side door assembly (WP
loose or broken alternator V-
and
notify
belts.
supervisor.
b. If alternator drive V-belts are
loose, notify supervisor.
c. If alternator V-belts are not
loose or broken, go to Step 3.
ALTERNATOR V-BELTS
ACCESS
PLATE
RADIATOR
401-087
