TM 5-3895-379-10
OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED
0006 00
EMERGENCY PROCEDURES - CONTINUED
3.
Reset Parking Brakes After Manual Release.
WARNING
Ensure that roller is secured to prevent any movement. Roller may freewheel when brakes are released.
Ensure that path of roller travel is clear of personnel and equipment. Failure to follow this warning may
result in injury or death.
a.
Chock drums (WP 0005 00).
b.
Remove 13 mm wrench, 4 mm socket head screw key and 5/64 in. socket head screw key from toolbox (Table
2, Items 4, 11 and 12, WP 0027 00).
c.
Lift latch (7), push handle (8) toward front of roller (9) and open left-side door assembly (10).
d.
Unhook lanyard (11) from left-side door assembly (10) and hook lanyard to frame assembly (12).
e.
Turn valve knob (18) counterclockwise to fully open valve (19).
f.
Tighten setscrew (17) in valve knob (18) using 5/64 in. socket head screw key.
g.
Using 13 mm wrench, loosen nuts (13) and (14).
h.
Hold nuts (13) and (14) and turn screws (15) and (16) counterclockwise using 4 mm socket head screw key
until stop is reached.
i.
Using 13 mm wrench, tighten nuts (13) and (14).
j.
Stow 13 mm wrench, 5/64 in. socket head screw key and 4 mm socket head screw key in toolbox.
13
15
CW
CCW
CCW
CW
14
16
401-080
0006 00-7
