TM 5-3895-379-10
DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS - CONTINUED
0004 00
CONTROLS AND INDICATORS - CONTINUED
15
16
17
401-2171
KEY
CONTROL OR INDICATOR
FUNCTION
15
Alternator Indicator
Illuminates to warn the operator of an alternator malfunction. If
the indicator does not go out in 15 seconds after the engine is
started or if the indicator comes on while the engine is running,
operator should shut down roller and investigate cause.
16
Throttle Control Switch (CB534C Only)
A two-position switch used to control the engine speed. Select
low (tortoise) for low engine idle speed or high (hare) for high
engine idle speed.
17
Throttle Control
Controls the engine Revolutions Per Minute (RPM). Push and
hold button to allow push/pull movement of throttle control. Push
throttle control down to reduce engine speed. Pull throttle control
up to increase engine rpm. Release button at the desired throttle
position. Turn throttle lock full right to lock the throttle control at
a desired engine rpm. Turn the throttle lock full left to release the
throttle control to change engine rpm.
0004 00-4
