SECTION 4
HYSTER-CARE MAINTENANCE
4-1.
GENERAL.
correlated closely with the operating hours recorded on
the hourmeter located on the instrument panel.
4-2. This section contains instructions necessary for
proper Hyster-Care Maintenance for the C350B Steel
Wheel Roller. Hyster-Care Maintenance is divided into
4-4.
HYSTER-CARE MAINTENANCE SCHEDULE.
two subsections: Hyster-Care Maintenance Schedule and
Hyster-Care Maintenance Procedures. The maintenance
4-5. Table 4-1 lists the recommended maintenance
schedule lists the recommended time intervals between
checks. It is outlined in two schedules: the hourly
maintenance checks.
The procedures subsection
schedule and the periodic schedule. If the unit is
provides detailed instructions for performing the
operated more than eight hours per day, the hourly
maintenance checks. Instructions listed in the procedures
schedule should be followed. If the unit is operated less
subsection are given by systems and are not necessarily
than eight hours per day, the periodic schedule should be
in the order listed in Table 4-1.
followed.
4-3. Hyster-Care
Maintenance
is
a
planned
4-6. Maintenance checks given in Table 4-1 are listed
maintenance program that: includes periodic inspection
in the same sequence as listed on the maintenance decal
and lubrication. Hyster-Care maintenance should be
starting with the eight hour checks. The first and last
columns of the table
FIGURE 4-1. MAINTENANCE CHECKPOINTS.
4-1
