SECTION 3
OPERATION
FIGURE 3-6. SUNDSTRAND TRANSMISSION
BY-PASS VALVE ON DIESEL
UNITS.
3-31.
SHIPPING THE UNIT.
3-32.
When shipping the roller, the four tie
down eyes should be used. One eye is located
at each end of the rear scraper bar mount and
under each operator mounting step in front. The
drive roll should be blocked front and rear and
on both sides. The guide rolls must be blocked
on both sides.
CAUTION:
Do not block the guide rolls front
and rear as it will shock load the
trunnion king pin and bearings.
3-33.
MISCELLANEOUS
OPERATING
POINTS.
a. Using the hood as an arm rest will
ensure smooth control.
b. No more than two people are allowed
on the machine when operating.
c. Do not use the steering wheel or direc-
tion-throttle bail as machine mounting assists.
d.
Always look in the direction of travel.
3-8.
