SECTION 2
SPECIFICATIONS
TABLE 2-6. TRANSMISSION AND TORQUE CONVERTER SPECIFICATIONS (CONT.)
DESIGN DATA
ITEM
ENGLISH
METRIC
TORQUE VALUES
Ft.-Lbs.
kg-m
Control valve attaching bolts
19
2.63
Oil pump attaching bolts
14
1.93
5/16 in. (7.94 mm) dia. bolts
19
2.63
3/8 in. (9.53 mm) dia. bolts
25
3.46
7/16 in. (11.11 mm) dia. bolts
40
5.53
9/16 in. (14.29 mm) dia. bolts
90
12.44
25
Pressure regulator caps
3.46
OIL
13 Qts.
Capacity
12.3 Ltr
Dexron is preferred, but
Type
Type A may be used.
However, DO NOT mix
Dexron and Type A.
TABLE 2-7. FINAL DRIVE AND TRANSFER CASE SPECIFICATIONS.
DESIGN DATA
ITEM
ENGLISH
METRIC
GEAR RATIO
1.73:1
Transfer Case
7.8: 1
Different
LUBRICANT
Transfer Case
SAE 90 EP
Type
5 Qts.
4.73 Ltr.
Capacity
Final Drive
SAE 90
Type
20 Qts.
18.93 Ltr.
Capacity
TORQUES
NOTE: Unless specified, all
values are given with
Ft.-Lbs.
kg-m
threads lubricated.
Final Drive
150-175
20.73-24.19
Wheel Nuts
30
4.15
Axle Flange Nut
140-155
19.35-21.42
Speed Reducer Mounting Nut
2-8
