TM 5-3895-346-14
ENGINE OVERHAUL
FUEL INJECTOR
Figure 10. Unusable Injector Plungers
Figure 11. Injector Tester J23010 Clamping Heads
Figure 10. Unusable Injector Plungers
Figure 12. Injector Installed in Tester J23010 with
Clamping Head
5. Reinstall the plunger, follower, and spring.
Installing Fuel Injector in Tester J 23010
1. Select the proper clamping head (Fig. 11). Position it on the clamping, post and tighten the thumbscrew into
the lower detent position (Fig. 12).
2. Connect the test oil delivery piping into the clamping head.
3. Connect the test oil, clear discharge tubing onto the pipe on the clamping head.
217