forward and reverse clutch lever activates the linkage rods and the shifting rods and the shifting arm. The yokes are
secured by pins (2) and cotter pins (7).
b. Removal.
(1) Remove the cotter pin (7) and pin (2) attaching the long rod yoke (3) to the shifting arm (1).
(2) Disconnect the yoke (3) from the shifting arm (1).
(3) Remove the cotter pin (7) and pin (2) attaching the long rod yoke (3) to the linkage bracket (6).
(4) Disconnect the yoke (3) from the linkage bracket (6) and remove the long rod (5).
(5) Remove the cotter pin (7) and pin (2) attaching the short rod yoke (3) to the linkage bracket (6).
1
Shifting arm
6
Linkage bracket
2
Pins, headed, (4 req'd)
7
Cotter pins, 3/16 x 1 (4 req'd)
3
Yoke
8
Short rod
4
Jam nuts, hex, 3/4-10 NC (4 req'd)
9
Lever shaft arm
5
Long rod
Figure 59. Forward and reverse clutch linkage disassembled.
(6) Disconnect the short rod yoke (3) from the linkage bracket (6).
(7) Remove the cotter pin (7) and pin (2) attaching the short rod yoke (3) to the lever shaft arm (9).
(8) Disconnect the short rod yoke (3) from the lever shaft arm (9) and remove the short rod (8).
c. Disassembly.
(1) Loosen the jam nuts (4) on the long (5) and short (8) rods.
(2) Unscrew the yokes (3) from the long (5) and short (8) rods.
(3) Unscrew the jam nuts (4) from the long (5) and short (8) rods.
151