CHAPTER 3
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. ORGANIZATIONAL TOOLS AND EQUIPMENT
45. General
The tools and equipment listed in this section are those that are required to perform organizational maintenance on
the tandem road roller. Standard mechanic's hand tools and on-equipment tools are not enumerated in this section.
46. On-Equipment Tools
The on-equipment tools normally supplied with this equipment for the use of the operator are listed in appendix III.
47. Special Organizational Maintenance Tools and Equipment
No special tools or equipment are required to perform the operations described in this chapter.
Section II. LUBRICATION AND PAINTING
48. General Lubrication Information
a. Lubrication Order 5-1185 prescribes first and second-echelon lubrication maintenance for the Roller, Road,
Gasoline Driven, Tandem, 2 Axle, 5 to 8 Ton, Galion Model T5G, with Engine, Continental Model F-244.
b. A lubrication order is published for each item of equipment. The lubrication order for this materiel is shown in
figure 15. For current LO 5-1185, refer to DA Pam 310-4.
c. Lubrication orders prescribe approved first and second-echelon lubrication procedures.
The
instructions
contained therein are mandatory.
49. Detailed Lubrication Information
a. Care of Lubricant. Clean lubrication is one of the most important items in the maintenance of this roller. All
lubricant chambers, fittings, and grease-gun nozzles must be kept clean and free of dirt and other abrasive materials.
Cover lubricant chambers with a clean cloth when covers are removed.
38
