TM 5-3895-383-24
Assemble Eccentric Weight Housing
6606-016
Tools Needed
A
C
D
E
148-2700
Lifting Bracket
1
158-0511
Seal Guide
1
157-2378
Seal Installer
1
8T-5096
Dial Indicator Group
1
1.
Heat inner bearing race (17) to 121°C (250°F) and twist
bearing race (17) onto shaft of weight (12) until bearing
race no longer turns on shaft (If equipped with shims,
replace shims).
2.
Repeat step 1 for opposite side of weight (12).
3.
Position cover (2) as shown.
4.
Lower the temperature of bearing (21) and, rotating
bearing until bearing seats, install bearing (21) in the
cover (2).
5.
Position housing (3) as shown.
6.
Repeat step 4 to install the bearing (22) in housing (3).
14-108