Yoke & Steer Pivot
Remove & Install Yoke & Steer Pivot
Remove the two bolts and hose guard (1) from both
sides of the drum. Move the hose assemblies and
wiring harness out of the way.
Attach lifting traps and a hoist to rear scraper (2) as
shown. Remove two bolts (3) from each side of the
yoke, and remove rear scraper (2) from the machine.
The weight of the rear scraper is 200 kg (440 lb).
Remove the two bolts and pins (4) that fasten the
steering cylinders to hitch (5).
Attach lifting straps and a hoist to yoke (6) as shown.
Rais e yoke (6) and move Tooling (A) from under the
yoke to under each side of the machine frame as
shown. Lower the machine frame onto Tooling (A).
Remove the four bolts and bottom clamp (7).