Disconnect wire (20) from the engine heater.
Disconnect electrical connector (21).
Disconnect two wires (22) from the alternator.
Remove the cable ties that fasten wiring harness (23) to
the engine. Move the wiring harness out of the way.
Loosen the clamp, and remove coolant hose (24) from
Remove five wires (25) from the s tarter.
Remove the nut, and remove cover (26) from the
Remove the remaining two wires from the starter.
Disconnect hose assemblies (27) and (28) from the
vibratory pump. Cap and plug immediately.
Disconnect two hose assem blies (29) from the vibratory
pump. Cap and plug immediately.
Disconnect two electrical connectors (30).
Disconnect hose assemblies (31) and (32) from the
propel pumps. Cap and plug immediately.