TM 5-3895-382-24
Hydraulic Tank Breather
Wash Breather
The hydraulic tank breather is located at the top of the
hydraulic tank. The platform must be tilted to remove
the breather, see the topic, Platform Tilting, in the
When Required section.
1.
Remove breather assembly.
2.
Wash breather in clean, nonflammable solvent.
3.
Use pressure air to dry breather. Air should blow
through breather.
4.
If breather is restricted it must be replaced.
5.
Install clean breather assembly.
Maintenance Section
1-81
Every 250 Service Hours or 3 Months