TM 5-3895-382-24
b. Installation.
(1)
Install three seals (10) on tee (11).
(2)
Install tee (11) in needle valve (8).
(3)
Position tee (11) in original position and tighten
nut (19).
(4)
Install two seals (10) on connector (18).
(5)
Install connector (18) in needle valve (8).
(6)
Install seal (14) in adapter (15).
(7)
Install adapter (15) on connector (18).
(8)
Install adapter (15) in bracket (17) with locknut
(16).
(9)
Install hose assembly (13).
(10)
Install hose assemblies (9) and (12) on tee (11).
(11)
Install panel (7) on frame (4) with five screws (5)
and washers (6). Snug, but do not tighten
screws.
(12)
Install screw (3), two washers (2), and nut (1) in
panel (7) and frame (4).
(13)
Tighten five screws (5) and nut (1).
NOTE
Follow-on Maintenance:
Fill hydraulic tank.
Start engine and check for leaks.
Close right door assembly.
Remove chocks.
END OF TASK
2-49