TM 5-3895-382-24
2-14. MANUAL BRAKE RELEASE NEEDLE VALVE REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts
Tool Kit, General Mechanics: Automotive
Seals (2)
(SC 5180-90-N26), Tool Number W33004,
Seals (2)
NSN 5180-00-177-7033
Tags, Identification (MIL-S-29190) 1,000 per
Wrench, Torque (0-170 lb-ft)
carton, NSN 8135-00-178-9200
NSN 5120-00-640-6364
Container (1 qt [0.91] minimum capacity)
Equipment Condition
Engine OFF (TM 5-3895-379-10)
Wheels and drum chocked
Hydraulic tank drained
a. Removal
(1)
Remove nut (1), washer (2), screw (3), and washer (2) from frame (4).
(2)
Remove five screws (5), washers (6), and panel (7) from frame (4).
WARNING
Hydraulic oil is very slippery and can cause falls. To avoid injury, wipe up spilled
oil with rags.
(3)
Place a container with 1 qt (0.91) minimum capacity under needle valve (8).
2-47