TM 5-3895-382-24
d. Assembly.
(1)
Install terminal bushing (30) and pipe plug (29) on blade assembly (5).
(2)
Install two bushings (28), four retaining rings (27), spacers (26), and bushings (25) on blade assembly (5).
NOTE
A bolt may used to align holes and hold the bar between the plates.
(3)
Install two washers (21), plates (22), bolts (24), bars (23), plates (22), washers (21), and nuts (20) on blade
assembly (5). Snug, but do not tighten nuts.
(4)
Install fourteen plow bolts (19), midsection cutting edge (17), two cutting edges (18), fourteen washers (16), and
locknuts (15) on blade assembly (5).
(5)
Install four plow bolts (14), two wear plates (13), four washers (12) and locknuts (11) on blade assembly (5).
2-33