TM 5-3895-382-24
a. Removal.
(1)
Remove locknut (1), washer (2), bolt (3), washer (2), and cylinder rod (4) from blade assembly (5). Discard
locknut.
WARNING
·
Blade assembly weighs 800 lbs (363 kg). Keep clear of equipment when
equipment is being raised or lowered. Equipment may fall and cause serious
injury or death to personnel.
·
Do not allow heavy components to swing while hanging by lifting device.
Equipment may strike personnel and cause serious injury or death.
·
Exercise extreme caution when working near a cable or chain under tension. A
snapped cable, shifting or swinging load may result in injury or death to
personnel.
(2)
Attach lifting device to blade assembly (5). Snug lifting device to support blade assembly.
(3)
Remove six locknuts (6), washers (7), bolts (8), and washers (7) from blade assembly (5).
NOTE
Shims may be present on left, right, both, or neither side(s).
(4)
Using lifting device, remove blade assembly (5) and shims (9) from yoke (10).
2-30