TM 5-3895-379-23
THROTTLE CONTROL REPLACEMENT (CB534C) - CONTINUED
0047 00
REMOVAL
1.
Disconnect electrical connector (1) from engine wiring harness (2).
2.
Remove nut (3) and washer (4) from ball joint (5).
3.
Remove ball joint (5) from governor control shaft (6).
4.
Remove four nuts (7), washers (8), bolts (9) and engine speed control solenoid (10) from bracket (11).
.
6
5
2
14
1
10
9
12
5
13
4
3
11
8
7
401-2085
INSTALLATION
1.
Install four bolts (9), washers (8), nuts (7), and engine speed control solenoid (10) to bracket (11).
2.
Install the ball joint (5) onto the governor control shaft (6).
3.
Install washer (4) and nut (3) on ball joint (5).
4.
Connect electrical connector (1) to engine wiring harness (2).
0047 00-2