LOW IDLE SPEED ADJUSTMENT - CONTINUED
ADJUSTMENT - CONTINUED
Engine low idle speed is 1075 to 1125 rpm.
Turning adjustment screw clockwise
increases engine speed. Turning adjustment
screw to the left decreases engine speed.
Throttle control must be set at the lowest
speed position (pushed down) before adjust-
ing engine low idle speed.
Loosen locknut (3) and turn screw (4) to adjust idle
speed. Use STE/ICE-R, Test No. 10 to monitor idle
speed (TM 9-4910-571-12&P).
When idle speed of 1075 to 1125 rpm is obtained, hold
screw (4) in place and tighten locknut (3).