TM 5-3895-379-23
REAR ENGINE MOUNT REPLACEMENT - CONTINUED
0012 00
REMOVAL - CONTINUED
WARNING
Do not place fingers between engine mount and frame assembly. Shifting engine may cause injury.
7.
Remove eight bolts (24), washers (25), two rear engine mounts (15), two resilient mounts (23) and remaining
spacer sleeves (20) from engine (22) and frame assembly (21).
INSTALLATION
1.
Install two rear engine mounts (15) on engine (22) with eight washers (25) and bolts (24). Tighten bolts to 60-90 lb-ft
(80-120 Nm).
WARNING
Use caution when handling heavy parts. Provide adequate support and assistance during procedure. Ensure
that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy parts sup-
ported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Engine weighs 2,000 lb (907 kg).
2.
Position two resilient mounts (23) between two rear engine mounts (15) and frame assembly (21).
3.
With assistance, use lifting device to lower engine
13
12
(22).
4.
Install two spacer sleeves (20), washers (19), bolts
(18), washers (17) and nuts (16) in two rear engine
mounts (15) and frame assembly (21).
5.
Tighten nuts (16) to 145-205 lb-ft (197-278 Nm).
6.
Install hose assembly mounting bracket (14) to left-
rear engine mount (15) with two washers (13) and
bolts (12).
15
14
401-244
0012 00-5