ENGINE OIL SERVICE - CONTINUED
DRAIN/FILTER REMOVAL - CONTINUED
Remove oil filter (2) and seal (3) from oil filter assem-
Dispose of drained oil and filter in accordance with
Clean the gasket mating surface of the oil filter assembly (4). Ensure all of the old filter gasket is removed.
Refer to Lubrication Chart in WP 0008 00 to determine correct grade of oil.
Fill the oil filter (2) with clean engine oil.
Apply a light coating of clean engine oil to the gasket (3) of new oil filter (2).
Tighten the oil filter element by hand only. Do not use a filter wrench to install the filter.
Install new oil filter (2) and seal (3) on oil filter assembly (4). When the gasket contacts the oil filter assembly, tighten
filter 3/4 turn more.