SERVICE UPON RECEIPT
When a used or reconditioned CB534B or CB534C Roller is first received, determine whether it has been properly pre-
pared for service and is in condition to perform its mission.
Follow the inspection and servicing instructions that follow.
Read and follow all precautions and instructions on DD Form 1397.
Remove all packing and shipping material, such as tape, tie downs, protective covers and shipping seals.
Cleaning compound, solvent MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. The use of protective gloves and goggles is sug-
gested. Use in well-ventilated areas. Keep away from open flames and other sources of ignition.
Clean any exposed metal parts coated with rust preventive compound. Use cleaning compound, solvent (Item 9, WP
Inspect equipment for any damage incurred during shipment. Check if equipment has been modified.
Check equipment against packing slip to ensure that shipment is complete. Report any discrepancies on SF Form 364.
Clean all external surfaces as needed. Touch up any paint scratches.
Remove all Basic Issue Item (BII), Additional Authorization List (AAL), and Components of End Item (COEI) equip-
ment and stow in accordance with TM 5-3895-379-10.
Service roller in accordance with PMCS instructions in TM 5-3895-379-10 and PMCS instructions in this manual (WP
Refer to TM 5-3895-379-10 and perform functional checks of all major roller systems to ensure roller is ready for oper-
ation. Remove all warning tags.
END OF WORK PACKAGE