Figure 2. Installing Crankshaft
Figure 3. Cone Mounted Pulley
Pulley Using Installer J 7773
On all in-line and 6V engines with the rigid-type pulleys and cone-mounted pulleys stamped with
the letter A, tighten the 3/4-16 bolt to 200-220 lb ft (271-298 Nm) torque.
10. When pulleys stamped with the letter U (in a square box) are used, tighten the 3/4-16 bolt to 290-
310 lb ft (393-421 Nm) torque.
Install and adjust the belts.