TM 5-3895-383-10
Operation Section
4-36
Machine Operation
Parking Brake
SMCS Code: 7000
NOTICE
Do not engage the parking brake while the machine
is moving unless an emergency exists.
The use of the parking brake as a service brake in
regular operation causes severe damage to the
parking brake system.
Illustration 49
Parking Brake - The parking brake control
is located on the operator console.
In order to apply the parking brake, push the knob
downward.
In order to release the parking brake, pull the knob
upward.
NOTE: In order to propel the machine, the propel lever
must be in the STOP position before you
release the parking brake.
Changing Engine Speed
SMCS Code: 1000; 7000
Illustration 50
The throttle control is used to control the engine speed
(rpm).
In order to increase the engine speed, rock the control
rearward.
In order to reduce the engine speed, rock the control
forward.
