TM 5-3895-383-10
2-18
Table 2-1. Operator Preventive Maintenance Checks and Services CONT.
Item
No.
Interval
Man-
hour
Item to be
Checked or
Serviced
Procedure
Equipment Not
Ready/Available if:
24 Before
0.1
Leveling
Blade
NOTE
Engine must be above low idle speed
to operate leveling blade.
a. Move the leveling blade control lever
backward to raise the blade.
b. Move the leveling blade control lever to
the center position to hold the blade in
position.
c. Move the leveling blade control lever
forward to lower the blade.
d. Move the leveling blade control lever
backward to raise the blade to full up
position.
Leveling blade will
not raise.
Leveling blade will
not hold.
Leveling blade will
not lower.
25 Before
0.1
Propel
Control
Lever/Back
Up Alarm
a. Check that propel control lever
operates smoothly without sticking or
binding in forward and reverse
positions.
NOTE
Back up alarm will not operate if back
up alarm cutoff switch is turned OFF
(Para 3-6).
b. Check that back up alarm sounds
when propel control lever is placed in
reverse position.
c. Return propel control lever to neutral
position.
Propel control lever
does not operate in
forward or reverse
position.
Back up alarm does
not sound while cutoff
switch is turned ON.
